Series 1100

High pressure pinch valve with open frame body for easy inspection

 

The Series 1100 Pinch Valve has been designed to provide a high pressure alternative to the Series 1000 Valve. Virtually maintenance-free, the sleeve is the valve’s only wetted part, eliminating possible contamination of the process materials. The 1100 Series Valve has no seats that require grinding, no packing glands or stuffing boxes which require repacking. Both torques and flow rates remain constant during valve operation. The valve will not become locked or jammed even when dealing with solids in the flow.

1/2" to 24" ANSI Class 150 or 300 bolt hole drillings; maximum 200 psig; carbon steel, aluminum or stainless steel: EPDM, Viton, Buna N, Hypalon, Butyl, Neoprene or Teflon sleeves; regular, reduced port, double

Technical Specifications

Primary Product Manual